1995 STI 717 Airbox Cover tight against Hull
pxctoday

» Log in

User Name:

Password:

Not a member yet?
Register Now!

» Find OEM Parts

» Jobs

» wallpapers

Results 1 to 4 of 4
  1. #1
    PWCToday Regular
    Join Date
    May 2022
    Location
    san diego
    Age
    60
    Posts
    77

    1995 STI 717 Airbox Cover tight against Hull

    Can't get around to the back right slide of the air box to get the cover off. If I got that slide over, I don't see how I get the cover up and off. The back right top of the air box is pushed right up against the hull.

    Any thoughts?

  2. #2
    PWCToday Regular
    Join Date
    May 2022
    Location
    san diego
    Age
    60
    Posts
    77

    Re: 1996 SPX 717 Airbox Cover tight against Hull

    sorry sorry sorry - 1996 spx
    Last edited by pbob42; 08-08-2022 at 06:32 PM.

  3. #3
    PWCToday Regular
    Join Date
    May 2022
    Location
    san diego
    Age
    60
    Posts
    77

    Re: 1995 STI 717 Airbox Cover tight against Hull

    pried it off - no damage. Can't believe this was the original design. Had to remove the bracket to get to get the box off. Going to remove the rear right slide when I reinstall. Think that should be sufficient

  4. #4
    PWCToday Regular
    Join Date
    May 2022
    Location
    san diego
    Age
    60
    Posts
    77

    Re: 1995 STI 717 Airbox Cover tight against Hull

    OK - PO had the box on backwards. Pulled it off and the metal housing was just sitting on the dual carbs. No bolts, no gaskets, no nothing. Bolt holes didn't line up. Having the plugged and going to re-drill. Should be good to go after that.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.2.0