Needing some help - my engine (jet ski's engine acttualy) was flooded.
pxctoday

» Log in

User Name:

Password:

Not a member yet?
Register Now!

» Find OEM Parts

» Jobs

» wallpapers

Results 1 to 5 of 5
  1. #1
    PWCToday Newbie
    Join Date
    Jan 2013
    Location
    Brasil
    Posts
    4

    Needing some help - my engine (jet ski's engine acttualy) was flooded.

    Does anyone could help me if the correct procedure when the engine was flooded?

    I alredy changed de oil, but its still getting white.

    How to drain completely this water that is inside de galerys?

    Its a sea doo gti 155 2008.

    If anyone has the manual service for this one, please sent me, I'll be greatfull.

    Aprecciate any help! thanks guys

  2. #2
    PWCToday Regular Zreno's Avatar
    Join Date
    Apr 2020
    Location
    Reno, NV
    Age
    20
    Posts
    120

    Re: Needing some help - my engine (jet ski's engine acttualy) was flooded.

    Pull the plugs crank it over until water stops spraying out then spray some carb cleaner in the holes put the plugs back in and it should ignite
    83 550/750 - westcoast head, westcoast pipe, timing advance, sbn 44, tau ceti arrestor, 18* skat, bored and blueprinted pump
    91 X2 650
    86 X2 750
    90 550/650
    92 750sx

  3. #3
    PWCToday.com Is My Home Away From Home Myself's Avatar
    Join Date
    Jun 2006
    Location
    Arkansas
    Age
    44
    Posts
    6,371

    Re: Needing some help - my engine (jet ski's engine acttualy) was flooded.

    The oil will get milky quickly when water has been in the engine. Change oil, run it on the hose at idle for 3 minutes, repeat. Probably needs about 4 oil changes.
    http://www.facebook.com/twinlakesjetskirepair

    '89 Kawi 650SX 42.4 GPS
    +3" stock pipe, ported ex. manifold, drilled waterbox, blueprinted pump, Ocean Pro ride plate

    '99 Yama GP1200 65U 61.8 GPS
    ported cylinders, matched cases, milled head, blueprinted pump, long ride plate

    '96 Seadoo HX 717 53.13 GPS
    light porting, massaged cases, lightened flywheel, port matched manifolds, Rossier pipe, stubby pump cone

  4. #4
    PWCToday.com Is My Home Away From Home john zigler's Avatar
    Join Date
    Mar 2003
    Location
    wisconsin
    Age
    53
    Posts
    9,459

    Re: Needing some help - my engine (jet ski's engine acttualy) was flooded.

    I have had to do up to 6 oil changes to get all the water out.......
    RCJS also doing business as WATCON
    608-743-1305 9am to 5pm CST m-f
    email watcon@watcon.com

    Please visit our web site

    new parts / products / services www.watcon.com
    thank you

    Please check out and like WATCON on Facebook

  5. #5
    PWCToday.com Is My Home Away From Home john zigler's Avatar
    Join Date
    Mar 2003
    Location
    wisconsin
    Age
    53
    Posts
    9,459

    Re: Needing some help - my engine (jet ski's engine acttualy) was flooded.

    With the Oil filter removed, and by cranking the engine over while holding the throttle wide open, you can suck more oil out of the oil filter canister. Keep cranking/sucking until no more oil comes.
    RCJS also doing business as WATCON
    608-743-1305 9am to 5pm CST m-f
    email watcon@watcon.com

    Please visit our web site

    new parts / products / services www.watcon.com
    thank you

    Please check out and like WATCON on Facebook

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.2.0