2000XL1200Ltdneed help putting back the impeller spacer
pxctoday

» Log in

User Name:

Password:

Not a member yet?
Register Now!

» Find OEM Parts

» Jobs

» wallpapers

Results 1 to 2 of 2
  1. #1
    PWCToday Newbie
    Join Date
    Apr 2018
    Location
    California
    Posts
    10

    2000XL1200Ltdneed help putting back the impeller spacer

    So on the 2000 XL1200Ltd I bought a '99 jetpump housing on eBay, busted mine when I had to cut the impeller off piece by piece. Also got a rebuild bearing kit from SBT(see below). It includes 66V-R1348-10-00 spacer which is all metal.
    https://www.shopsbt.com/jetski/yamah...uv-gp-140.html

    66V-R1348-10-00(the one shown as right spacer between seals and impeller)
    https://www.partzilla.com/product/ya...9bed5859d28bca

    Problem is on my shaft the spacer that was on was a different one than Partzilla shows as reference.
    62T-51348-00-00 rubber seal and inner metal spacer(what I had on)
    https://www.partzilla.com/product/ya...6947db8129d15b

    I cannot use the 66V-R1348-10-00 because when I tighten it with the groove toward the jet pump bearings the impeller becomes tight and is hard to spin by hand, it is supposed to be spinning more freely.

    If I install with the flat part toward the jet pump bearings and the grove toward the impeller it's fine but I didn't see it being installed that way anywhere.

    I need help with this should I just buy the one that was there 62T-51348-00-00, or install the all metal one 66V-R1348-10-00 flat toward seals?

  2. #2
    PWCToday Newbie
    Join Date
    Apr 2018
    Location
    California
    Posts
    10

    Re: 2000XL1200Ltdneed help putting back the impeller spacer

    Quote Originally Posted by gica View Post
    So on the 2000 XL1200Ltd I bought a '99 jetpump housing on eBay, busted mine when I had to cut the impeller off piece by piece. Also got a rebuild bearing kit from SBT(see below). It includes 66V-R1348-10-00 spacer which is all metal.https://www.shopsbt.com/jetski/yamah...uv-gp-140.html66V-R1348-10-00(the one shown as right spacer between seals and impeller)https://www.partzilla.com/product/ya...9bed5859d28bcaProblem is on my shaft the spacer that was on was a different one than Partzilla shows as reference.62T-51348-00-00 rubber seal and inner metal spacer(what I had on)https://www.partzilla.com/product/ya...6947db8129d15bI cannot use the 66V-R1348-10-00 because when I tighten it with the groove toward the jet pump bearings the impeller becomes tight and is hard to spin by hand, it is supposed to be spinning more freely. If I install with the flat part toward the jet pump bearings and the grove toward the impeller it's fine but I didn't see it being installed that way anywhere.I need help with this should I just buy the one that was there 62T-51348-00-00, or install the all metal one 66V-R1348-10-00 flat toward seals?
    I got it the recess on the spacer goes toward the impeller

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.2.0