This here was the hardest bracket to make!
Mounts the chamber to exhaust header on oem location, but, offset just a bit.

Chamber to rear exhaust outlet, in.

Waiting on 2 relays, for electrical and some jets for the carbs. Last minute pulled the carbs to make sure jetting was the same as our 1100HX (which has identical motor)…
Glad I did, it wasn't the same...I forgot we were running a stock exhaust on this motor prior to this project. It wasn't far off, but I would of been scratching my head on tuning day.
But, hey, battery is in and it cranks over!

On another note...
Three things I'm missin' right about now.
Being at the Jet Jam races

Relaxing at the beach

Hanging with friends...without a 6ft rule