Is there a proper side to install the round clear diaphrams? I hate to damage the rubber plugs should I have to pull out and reinstall. Thanks !
Mikuni Carb clear diaphrams
Collapse
X
-
Re: Mikuni Carb clear diaphrams
There’s a special tool to do it. I usually use lots of lube and press with my thumb. I’ve heard of people using Allen keys with the ball end too
Sent from my iPad using Tapatalk1994 FX1
1985 JS550/650 conversion
2015 Fiat 500 Abarth
-
-
Re: Mikuni Carb clear diaphrams
The Check Valve Discs are cut from a plastic sheet that comes in rolls.
Therefore, the Discs will have a slight curl.
The "curl" side must face towards the plate so it can lay flat and seal properly.
If you install the Disc the other way, they will leak because they won't lay flat and seal properly.
Comment
-
Comment