Head gasket for 650 cylinder bored +2mm
pxctoday

» Log in

User Name:

Password:

Not a member yet?
Register Now!

» Find OEM Parts

» Jobs

» wallpapers

Results 1 to 3 of 3
  1. #1
    PWCToday Newbie
    Join Date
    Jun 2014
    Location
    Ontario, Canada
    Posts
    8

    Head gasket for 650 cylinder bored +2mm

    Like title says - anyone have a source for stainless head gaskets to fit 78mm bores? The stocker overlaps into the bores and I have the squish set up for stock gasket thickness so I'd rather not go with a fiber .040 gasket.

    I could grind back a stock gasket to fit the 78mm bore, but then it would lose the crimped/raised area around the cylinders. Is this a problem?

  2. #2
    PWCToday.com Is My Home Away From Home BLRider's Avatar
    Join Date
    Apr 2007
    Location
    SE MI
    Age
    54
    Posts
    8,645

    Re: Head gasket for 650 cylinder bored +2mm

    You could use a stock 750 head gasket (80mm) or call Conetic.
    Never argue with an idiot, they will drag you down to their level then beat you with experience.

  3. #3
    PWCToday Newbie
    Join Date
    Jun 2014
    Location
    Ontario, Canada
    Posts
    8

    Re: Head gasket for 650 cylinder bored +2mm

    The 750 has the same cylinder spacing and bolt pattern then? That seems like the best choice, thanks.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.2.0