1998 XP 951 starter issues
pxctoday

» Log in

User Name:

Password:

Not a member yet?
Register Now!

» Find OEM Parts

» Jobs

» wallpapers

Results 1 to 2 of 2
  1. #1
    PWCToday Newbie
    Join Date
    Aug 2010
    Location
    Aledo TX
    Age
    38
    Posts
    34

    1998 XP 951 starter issues

    Been having a starter issue on my 98 XP 951. Start button will engage starter on a hit and miss basis. Seems that on first start up attempt it works fine. But after a couple of times within a few minutes it seems to skip. Starter will briefly engage then stop. Sometimes it will only spin the starter gear and not the engine. Then it completely goes to nothing. I have two XPs so to eliminate the solenoid I swapped with my 99 XP. Same issue. So itís not the solenoid. When the start button fails to engage I can still hear a clicking in what I believe is a regulator on the outside of my electrical box where the solenoid is located. Iím curious as to if this regulator would cause my starter to work a couple of times but then stop. Maybe itís heating up then failing to work at all? I tried to look this particular part up on the parts manual but canít pinpoint it. Batteries are all fully charged as well. Any ideas or avenues to check would be appreciated. I attached a pic of this ďregulatorĒ if anyone recognizes it. I could be completely wrong about what it is.
    Attached Images Attached Images
    02' F12X
    05' R12X
    02' Bayliner Capri 2050

    "A golf course is a waste of a perfectly good rifle range.

  2. #2
    Resident Guru SURFnTURF's Avatar
    Join Date
    Sep 2004
    Location
    AUSTRALIA
    Posts
    1,189

    Re: 1998 XP 951 starter issues

    The 98s had issues with the bendix gear, the timing on the mpem was advanced too far under 400 rpm while cranking and it would chip teeth off
    Each time it stopped at the same position and metal fatigue occurred
    Try to get a 99+ bendix as they are stronger and don't break as often.
    Flywheel has to come off , easier to pull engine and do on the bench.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.2.0