pxctoday

» Log in

User Name:

Password:

Not a member yet?
Register Now!

» Find OEM Parts

» Jobs

» wallpapers

Results 1 to 7 of 7

Thread: rxdi problems

  1. #1
    PWCToday Newbie
    Join Date
    Jun 2016
    Location
    2116 john arthur way
    Age
    50
    Posts
    12

    rxdi problems

    To start off with. I have a 03 rxdi. It got sunk in the ocean. Changed the battery and rectifier. Pulled the plugs. Blew all the water out. Had it running but was running like crap. Done a compression test and found to only be running 90 lbs at that point I pulled the heads. So here is where my 2 part question lies. Put a puller on the wrist pins. Cranked it down to the point to where i though i was right before the "Oh ****". And the pins wont budge. That and i cant turn the engine over by hand. ANy insight or direction would be greatly appreciated.

  2. #2
    PWCToday Regular
    Join Date
    Aug 2012
    Location
    whitby ont canada
    Age
    60
    Posts
    142

    Re: rxdi problems

    Do yourself a favor and just pull the motor, and take it apart, will be better to deal with it on the bench than in the hull and you need to split the bottom end anyway

  3. #3
    PWCToday.com Is My Home Away From Home Myself's Avatar
    Join Date
    Jun 2006
    Location
    Arkansas
    Age
    41
    Posts
    4,840

    Re: rxdi problems

    Def agree with that. Also with mid pipe mount removed the whole pipe will come out without jacking with the big stainless clamp.
    http://www.facebook.com/twinlakesjetskirepair

    '89 Kawi 650SX 42.4 GPS
    +3" stock pipe, ported ex. manifold, drilled waterbox, blueprinted pump, Ocean Pro ride plate

    '99 Yama GP1200 65U 61.8 GPS
    ported cylinders, matched cases, milled head, blueprinted pump, long ride plate

    '96 Seadoo HX 717 53.13 GPS
    light porting, massaged cases, lightened flywheel, port matched manifolds, Rossier pipe, stubby pump cone

  4. #4
    PWCToday Newbie
    Join Date
    Jun 2016
    Location
    2116 john arthur way
    Age
    50
    Posts
    12

    Re: rxdi problems

    Yea that was my next step. I guess since this is my first time I ever done this. I wasn't understanding if it spun before it went down. WHy don't the crank turn now. That and I have a lot of insecurity about going into the bottom and making sure everything is timed right. Once I try to bring it back to life.

  5. #5
    PWCToday Newbie
    Join Date
    Jun 2016
    Location
    2116 john arthur way
    Age
    50
    Posts
    12

    Re: rxdi problems

    Oh i have probably torn down way more than i should. But I have pics. So I hope it goes well

  6. #6
    PWCToday Regular
    Join Date
    Aug 2012
    Location
    whitby ont canada
    Age
    60
    Posts
    142

    Re: rxdi problems

    Down load the manual, read the engine section , take your time , keep it clean, and you will be fine

  7. #7
    PWCToday Newbie
    Join Date
    Jun 2016
    Location
    2116 john arthur way
    Age
    50
    Posts
    12

    Re: rxdi problems

    I have broken the engine down. I need a new oil pump. Where do I get the oetiker clamps that goes on the 3 lines from the oil pump and what size are they

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.2.0