pxctoday

» Log in

User Name:

Password:

Not a member yet?
Register Now!

» Find OEM Parts

» Jobs

» wallpapers

Results 1 to 3 of 3
  1. #1
    PWCToday Regular
    Join Date
    Aug 2015
    Location
    Kalamazoo, Michigan
    Posts
    130

    Solas reduction nozzle issue

    I purchased a Solas reduction nozzle for a 140mm pump but it doesn't fit correctly. The pilot bore on the reduction nozzle is way bigger than the pilot on the pump and there is a small gap around the outside and specifically at the top where the bilge vacuum line would be. The Solas nozzle does not have provisions for the vacuum lines so they just block off. The mounting bolt holes line up with the pump. What gives with this thing is not for a 140mm pump? 30c4c4c91f29ba029c7ad2ba856d7a0b.jpg20171105_192617.jpgc964c96ce47ff045c18f8e4782e1f489.jpg
    Attached Images Attached Images
    Last edited by critracer; 11-07-2017 at 08:10 AM.

  2. #2
    PWCToday.com Is My Home Away From Home Matt Braley's Avatar
    Join Date
    Dec 2011
    Location
    Niceville, FL
    Age
    43
    Posts
    3,185

    Re: Solas reduction nozzle issue

    That does not look like a Solas nozzle. I think it's one that used to be sold out of the Hot Products catalog. I've had them fit that way and not cause an issue, I do think that it's made for the 140mm pumps. Just hit it with a thin coat of sealant when you assemble.

  3. #3
    PWCToday Regular
    Join Date
    Aug 2015
    Location
    Kalamazoo, Michigan
    Posts
    130

    Re: Solas reduction nozzle issue

    Thanks for the info Matt.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.2.0