pxctoday

» Log in

User Name:

Password:

Not a member yet?
Register Now!

» Find OEM Parts

» Jobs

» wallpapers

Results 1 to 2 of 2
  1. #1
    Frequent Poster banjomaniac's Avatar
    Join Date
    Jul 2009
    Location
    nc
    Posts
    266

    Reverse buclet repair kit

    I ordered a reverse bucket kit from Brian. I installed it and no change. Maybe I'm missing something but I pushed out the old plastic bushings and drove out the metal insert and the new ones were TIGHT. my guess is the bolt might not be the right one, seems like it should have less threads and more shoulder so you can tighten it all the way but maybe I don't understand the purpose of the plastic end and the metal other than keeping it from wearing out but if the bolt tightens on the bucket it will never move easily?

    Banjomaniac

  2. #2
    Frequent Poster banjomaniac's Avatar
    Join Date
    Jul 2009
    Location
    nc
    Posts
    266

    Re: Reverse buclet repair kit

    Ok, instructions should be included, it's obvious how it goes together BUT before you put the bushings in, take some sand paper and run it in the hole to get rid of all the corrosion. The bushings should slide in easily, not sloppy but after they are in the metal insert should be lose and spin inside the bushings freely.

    Banjomaniac

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.2.0