02 gtx 4tec not turning over

[pucoa1]

Looked for codes. Found fuel pump grounded. Pulled it out. Was terrible looking. Got replacement at autozone. Now the fuel pump kicks on with dess key. But the fuel lever sensor is bad. I need a new one. I have that code now.

Would fuel lever sensor cause it not to turn over. The fuel is empty at the moment. Would fuel pump notice and not turn engine over?

[ccm]

wow. yep, that would do it. MPEM contols that relay. Good catch on that. Never thought of that. was it all rusted?

[pucoa1]

So if I replace the fuel level sensor it should turn over?

[ccm]

possibly. If it was shorting to ground, the MPEM may prevent the relay from triggering. Check your ground wires too. If the pump is all rusted, that indicates gas containing ethanol. ethanol contains about 10-15% water. Water promotes rust. You may have to find a place to buy 0 ethanol fuel in your area. A lot of marinas have that cause boaters get upset when they have to replace their water separators prematurely. FYI, most seadoos have to have the code cleared by the dealer. So, the next time you take it in, you'll have to ask them to clear it. pretty sure anyways.

[ccm]

Or call Seadoo and ask them directly. Don't know if a fuel sensor would prevent that.

[PDoyle]

So have you solved the problem by replacing the fuel level sensor?

[pucoa1]

I'm not exactly sure. I think changing the fuel level sensor fixed it. Then it was not enough current to the relay. Changed beg battery cable and now it turns over great. Actually it's running great now. Just changed oil and coolant. Need to program a new key. Only have learner one now. Also need to epoxy some new gas tank strap brackets on.

This ski was a lot of work.

[PDoyle]

Good to know thanks. Why do you have to mess with the gas tank strap brackets ?