When you say the board are you referring to Mpem? I unplugged the 6 pin harness going to vts module to narrow down if the fuse would still blow if unhooked. It still did. Does that 7.5 fuse just run to vts module? I did build the trim fix thing out of relays but it made no difference. As soon as I install fuse it pops

Quote Originally Posted by Benflynn View Post
Something is going to ground if it kicks the fuse instantly, I'd check wires for ground that should have none, it'll show 0 or close ohms. Then I would open her up and see what's grounding out, if the board is corroded a lot it could be layers in the board shorting. I don't know if that is a multi layered board but it prob is. There is a good chance a visual inspection of the components can find a short