I will be cutting / shaving up my x2 hull and need some ideas / help please
pxctoday

» Log in

User Name:

Password:

Not a member yet?
Register Now!

» Find OEM Parts

» Jobs

» wallpapers

Results 1 to 2 of 2
  1. #1
    PWCToday Newbie G.borrero's Avatar
    Join Date
    Jun 2019
    Location
    CALIFORNIA
    Age
    25
    Posts
    19
    Blog Entries
    1

    I will be cutting / shaving up my x2 hull and need some ideas / help please

    I am gunna finish building this x2 and need some ideas and help info this will be a freestyle flatdeck kawi x2 hull with a 750cc bored out too a 780cc i am trying trying to cut / shave my x2 hull all up i got questions and some ideas check them out below please

    Question #1 i will be cutting the hull will cutting this low affect anything at all & what material do i use to re fiberglass a flat deck after cut there will be a empty space??

    Question #2 what exactly all is located underneath the fire extinguisher compartment and under the front steering panel?

    Question #3 What should i beware of and risks of cuttingbup the x2 hull perieod?

    Question #4 what a good list of x2 engine modifications to start with that are affordable like prop head internals flywheel and electronics to deliver instant power to rip me out the water for my 750 small pin bored to 780cc dual keihin carb setup with single cooling system will be doing dual cooling real soon?
    Attached Images Attached Images
    Last edited by G.borrero; 07-20-2019 at 12:04 AM.
    FTW Freestyle X2 Rider

  2. #2
    PWCToday Newbie G.borrero's Avatar
    Join Date
    Jun 2019
    Location
    CALIFORNIA
    Age
    25
    Posts
    19
    Blog Entries
    1

    Re: I will be cutting / shaving up my x2 hull and need some ideas / help please

    I am gunna finish building this x2 and need some ideas and help info this will be a freestyle flatdeck kawi x2 hull with a 750cc bored out too a 780cc i am trying trying to cut / shave my x2 hull all up i got questions and some ideas check them out below please

    Question #1 i will be cutting the hull will cutting this low affect anything at all & what material do i use to re fiberglass a flat deck after cut there will be a empty space??

    Question #2 what exactly all is located underneath the fire extinguisher compartment and under the front steering panel?

    Question #3 What should i beware of and risks of cuttingbup the x2 hull perieod?

    Question #4 what a good list of x2 engine modifications to start with that are affordable like prop head internals flywheel and electronics to deliver instant power to rip me out the water for my 750 small pin bored to 780cc dual keihin carb setup with single cooling system will be doing dual cooling real soon?

    MODIFICATIONS IDEAS

    1.5 to 2 inch cut straight off the back with a 45 degree angle on both sides as usual off ski &
    Then 4 to 5 inch off flush with the top back seat locker panel to expose nozzle and still keep ride plate lower bolts

    Shave the hood scoop off remove the handle bar upper plastics expose bar stem completely bolt through the stem mod cut/shave the frontskide of handle bar panel to be flush so when i turf it its all one smooth transition

    i want to add the 750 pump and prop kit is it worth it whats the diffrence in the 750 pump and the stock 650 with trim also how could i do the trim up modification on nozzle what are good nozzle mods
    FTW Freestyle X2 Rider

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.2.0