Search:

Looking for plastic handle. Preferably in grey. Let me know thanks

Is it safe to use a macsboost with the code 25 fix? Also if you can tune the aquatrax computer is it safe to increase boost and performance with the code 25 fix/delete? Thanks.
I am considering...

Do you have macsboost module on it? If so how much?

I have 2004 f12x. I had Gentune fix the code 25 fault in the ECU. Is it safe to install macsboost in my aquatrax with no knock sensor protection? Thanks

Ok thanks I was worried I had a problem I have the same reading.

Thanks that's perfect. By the way is that normal pressure? at 80psi. I also have a high reading. Just took the entire engine apart trying to find a blocked passage. I found absolutely nothing...

I have an 2004 aquatrax. The oil pressure gauge I installed is showing higher than normal pressure. I changed the oil filter. And checked the pressure relief valve. The relief valve still opens and...

Never mind I will just use the inspection gauge and reconnect the sensor.

This happened to me once. I found that running on the hose doesn't circulate the oil very well. Change the oil at home then take it to the waterway and run it on the water gentilly for a few...

I want to install an oil pressure gauge on my 2004 f12x can someone recommend a location 2 screw in 2. Or where to buy an adapter to install between the sensors. Thanks

What! 2004 with five hours. Your not gonna get away asking for advise and not at least posting some pics of that thing in here. We wanna see that thing.

So be advised the exhaust manifolds will...

I have two 2004 aquatrax skis. One is turbo one is non turbo. The non turbo is throwing intermittent code 25s. That are happening constantly now. My question is can i SAFELY switch ecu from turbo to...

New turbo installed. I noticed some smoke when running.after awhile for some reason i had the intake off and intercooler i noticed motor oil pooling in the intake and turbo cartridge. Is that normal....

I put a new driveshaft bearing assembly on the other day. I noticed some grooves in the drive shaft where the bearing assembly rolls over the shaft. I didnt think much of it because they were not...

Driveshaft bearing?

On my 2004 aquatrax F12 the drive shaft bearing housing has two hoses coming out of it. Today I noticed I have water entering the compartment where the drive shaft bearing is located.the water was...

Same happened to me recently. Check you oil for water contamination. And if you have a turbo pull the duct off the intake side and see if the compressor wheel is loose. Thats what happened to me. It...

I have a code 25 ecu. Are you still looking to work on these? (2004 f12X) thanks

Do you buy them?

If this flange leaks can it allow water to enter the inside of the hull? I mean between the inner and outer shell not the engine compartment. My aquatrax leans the longer it is in the water to the...

I need an f12x turbo motor. I live in Florida. If your near Volusia county text me. 386 -479 -
3408

I am looking to buy a Honda aquatrax motor for my F12x turbo. If anyone has one for sale please contact me. I live in Volusia county. Florida. I already have a new turbo and exhaust manifold so if...

I need a running motor please contact me

537867 here is the oil pan from my Honda aquatrax. It looks like bearing and metal shavings the engine still turns on but it rattles really bad. Is this worth saving or parted out has junk

I am pleased to announce that I have a brand new turbo and brand new exhaust manifold and the cherry on top is while I was out riding I pulled in the dock area to do an oil level check and I could...

Just out of curiosity do you remember if your jetski was leaning on that same side where you had a drip because my jet ski is leaning and I noticed a broken bolt on my sponson. same side. and I have...

I recently discovered I have the same problem I disagree that this is something you should get used to I have two aquatrax one is very stable and the other one leans to the right therefore something...

By the way no water in the engine compartment.

When I put my ski in the water at first it seems perfectly balanced but after a while it is clearly listing to the right to the point where if I turn the wheel to the left and throttle slightly it...

I just test run the engine to see how much oil was coming out of the turbo supply line if it's flowing hard I don't think you need to worry about cleaning the filter but after what I just went...

Yeah I'm sure that there is still contamination in the oil even though I've changed it out about four times once I get it back on the water I would definitely will change it after half an hour or so...

So today I remove the engine put a new manifold and and I cleaned the screen and the oil supply line to the turbo which was 100% clogged with with what I believe to be oil filter fiber. Before I had...

Thanks for the pic. Ill try to post mine when i do the turbo and manifold this week. Thanks jet ski international

Now to find a manifold

Wow thanks for telling about the screen in the turbo line. I saw the screen location in the engine diagram. I'm gonna pull it this week. That has got to be what's restricting the oil flow. Thanks a...

i removed the exhaust housing today. I capped all the hose ports except for the one i connected to the water hose. There was a very very slight drip into the exhaust. and that was with a lot of water...

Thank you. I was hoping it wasnt cracked head. Good news

I was on the river in my 04. Honda aquatrax turbo. Suddenly the speed dropped to max 20 mph. When i returned to the dock i checked the turbo it was destroyed on the inside compressor wheel and...

I was on the river in my 04. Honda aquatrax turbo. Suddenly the speed dropped to max 20 mph. When i returned to the dock i checked the turbo it was destroyed on the inside compressor wheel and...