Search Results - PWCToday
pxctoday

» Log in

User Name:

Password:

Not a member yet?
Register Now!

» Find OEM Parts

» Jobs

» wallpapers

Search:

Type: Posts; User: NoMoney; Keyword(s):

Page 1 of 2 1 2

Search: Search took 0.01 seconds.

  1. Re: 11/14 Pitch for 760 venture is hurting its top speed

    Thanks for that tip.It worked,not much but I grabbed another 300rpm.Was surprised it gained Rpms leaning it,I must have had it to rich.I set lows to stock and highs only 1/8 out past stock. I...
  2. Re: 11/14 Pitch for 760 venture is hurting its top speed

    You think shaving the stock head would be worth it to attempt to gain few hundred Rpms and help turn the blade?I donít expect much from doing this but if thereís something to be had I would.Someone...
  3. Re: 11/14 Pitch for 760 venture is hurting its top speed

    Gotcha,So you basically have a 701 with a 155 pump?This was my point,I was suggesting that the 760 would be slightly faster with a 144 pump. And I believe Yamaha figured that out also as they only...
  4. Re: 11/14 Pitch for 760 venture is hurting its top speed

    Good call I will check that. The 760 has odd settings
    Low speed is 1 5/8 Both High speed is 3/8 both. I’m thinking to turn in the Lows slightly and out on the highs a bit.Someone may have set the...
  5. Re: 11/14 Pitch for 760 venture is hurting its top speed

    Hey thanks. So only a little rich,meaning if it’s hitting it’s peak say at 1/8 past stock,then I should not go richer?The 760 has staggered compression,lower rear cyl psi then front but the carb...
  6. Re: 11/14 Pitch for 760 venture is hurting its top speed

    Forget to mention I’m not sure if the nozzles bore,I’ll check that.
  7. Re: 11/14 Pitch for 760 venture is hurting its top speed

    I’ve been playing tuning all this summer I was short on Rpms,but fattening the highs I obtained a decent chunk. I wanted it set up closest to stock peak rpms before playing with pitch. The book says...
  8. 11/14 Pitch for 760 venture is hurting its top speed

    Anybody found a good pitch to run the venture 760?This ski is is a 47.2 top speed @6300rpms only. The 701 is 45.4 with a 144mm pump. Thatís only a 1.8mph difference from a larger power plant larger...
  9. WTB INTAKE GRATE RIDE PLATE FA AND ADAPTERS VENTURE 701 DUAL 38s

    As it says,for a venture. I believe the grate from raiders will fit on my 95 venture,flame arrestors and Adapters Ride plate msd or better then stock coil. Possibly impeller only...
  10. Replies
    31
    Views
    2,349

    Re: R&D grate for waveventure , raider

    Sorry to bug you,wana still sell the FA?Ill pay you for them,just lmk whenever you have time. I have a k@n but wrong type no adapters itís just basically acting as a cover.
  11. Replies
    31
    Views
    2,349

    Re: R&D grate for waveventure , raider

    Sorry just got back online. Iíll take the filters let me know how to do it. Should I send a pm with my PayPal?Do you have adapters?On that impeller do you happen to have 1,if not I can PayPal you for...
  12. Replies
    31
    Views
    2,349

    Re: R&D grate for waveventure , raider

    Can I use them on duals?If so I’ll take them. I’ll pay for you it’s only fair. Hell ya that was a steal of a deal Lotta people looking for grates and stuff on the groups. He was a really good guy...
  13. Replies
    31
    Views
    2,349

    Re: R&D grate for waveventure , raider

    Itís all good. You didnít know we were from same group And I did bug you few times on the grate wich made me look like I was window shopping.Because several kept asking me then Iíd ask you then they...
  14. Replies
    31
    Views
    2,349

    Re: R&D grate for waveventure , raider

    Who asked for anything for free dude??I asked you got anything else for sale!
    I sold your grate for you and asked if you had anything else to maybe buy myslef or to tell others who ask for...
  15. Replies
    31
    Views
    2,349

    Re: R&D grate for waveventure , raider

    Got anything else for a venture or raider
  16. Replies
    31
    Views
    2,349

    Re: R&D grate for waveventure , raider

    honestly times are right. I still need to find a impeller for the venture flame arrestors shorter ride plate. Whatís absolute lowest shipped 60459
  17. Replies
    31
    Views
    2,349

    Re: R&D grate for waveventure , raider

    Is there a negative that it is heavy?I see a bend on the edge of funnel is that how they are. This is for a venture 144 pump
  18. Replies
    31
    Views
    2,349

    Re: R&D grate for waveventure , raider

    Sold?
  19. Re: (2) Riva Racing and R&D aquavein WaveRaider intake grates for just 1...

    Do you have pics,and price
  20. Replies
    31
    Views
    2,349

    Re: R&D grate for waveventure , raider

    Can you send me a pic of top side
  21. Re: (2) Riva Racing and R&D aquavein WaveRaider intake grates for just 1...

    Thank you
  22. Re: Pro tec exhaust from a 650 work at all on a 701?

    Sounds good,will call you.
    1 thing,how close will it be to say a Solas with same pitch..
    And the new pitch numbers will you go off whatís recommended by you guys or whatís being recommended for...
  23. Re: Pro tec exhaust from a 650 work at all on a 701?

    Thanks for responding. What I was thinking was the pipe the big piece that goes into the manifold pipe that is a muffler right?If I kept the stock manifold wouldnt the pipe slide into the stock elbow...
  24. Re: (2) Riva Racing and R&D aquavein WaveRaider intake grates for just 1...

    Yes you saved me on this. Plus looking at the shovel the factory is so much bigger it glows into the pump much further. It’s actually a good grate wish I could weld a piece to it and there’s your...
  25. Replies
    11
    Views
    15,841

    Re: 650 protec pipe on 701

    Thank you for the response. I have same exact dilemma. But sounds like its a bit of a job. I was hoping bolt on.wouldnt you have been able to just use the pro tech “muffler” pipe and clamp that to...
  26. Re: Pro tec exhaust from a 650 work at all on a 701?

    I was asking if Watcon will re-pitch my ss factory one. And how much will it cost. Thanks.
  27. Replies
    11
    Views
    15,841

    Re: 650 protec pipe on 701

    I stumbled on this and have same exact situation. Pro tec 650 exhaust tryng to swap it to the 701 62t. Did you ever succeed in this if so any issues with fitment?
  28. Re: Pro tec exhaust from a 650 work at all on a 701?

    Do you guys repitch the factory Yamaha impeller
  29. Re: Pro tec exhaust from a 650 work at all on a 701?

    ...
  30. Re: (2) Riva Racing and R&D aquavein WaveRaider intake grates for just 1...

    Actually Sorry,I just noticed yours is 701. Your looking for same thing I’m looking for. So the 1 I posted is gonna be same thing as what you bought. So strike that. But anyways do you wana sell...
  31. Re: (2) Riva Racing and R&D aquavein WaveRaider intake grates for just 1...

    I’m about to buy this 1 Friday locally it’s the 1 you need. I need the 1 you got. But I was planning on custom fitting this 1 to my ski but I’d be willing to get it and trade you. Lmk. Either way I’m...
  32. Re: Pro tec exhaust from a 650 work at all on a 701?

    I was curious if I could use any of it without any modifications,either the pipe and elbow just pipe or just water box to see better response on low end. Iím going to buy 1 or send out my factory ss...
  33. Re: Pro tec exhaust from a 650 work at all on a 701?

    Are you meaning if I used the whole setup manifold pipe and box?
    Can just the water box be used or is that just gonna make the ski louder and no Improvement in throttle response.
  34. Re: Pro tec exhaust from a 650 work at all on a 701?

    Gotcha.My thoughts were maybe if just the pro tec pipe fit on the 701 elbow or something like that and I know the yami stock water box is decent but maybe the pro tec will allow more pressure to...
  35. Pro tec exhaust from a 650 work at all on a 701?

    Have a complete pro-tec exhaust system pipe water box,I heard the stock 650 will work on a 701 but With a loss of performance,will the pro-tec even fit if I have everything and manifold if so will it...
  36. Re: IMPORTANT Question Carb Adjustment screw spring vital or not important?

    Thanks so much for the reply. Yes today I learned that spring is important. Adjusting using the T screw I put in with the spring is free as can be. The design of the T adjuster is flawed in that it...
  37. IMPORTANT Question Carb Adjustment screw spring vital or not important?

    Swapped hs N ls adj screws out to the T type. On a 95 dual
    701 those did not help and actually the oem screws were easier to adjust while
    carb is mounted. The rear LS is little
    easier now but not...
  38. Replies
    1
    Views
    4,451

    Re: 2 new mikuni flame arrestor adaptors 38/40

    Will these work on a wave venture dual carb?Arent the newer square carbs 3 screw adapter
  39. Re: New 94-97 waveraider & wave venture 701/760 R&D intake grate

    Ever sell it
  40. Re: Vxr parts interchange with wave venture help on parts

    Is there a way to pm you?How much would ya take shipped to 60459
  41. Re: Vxr parts interchange with wave venture help on parts

    Sorry Never mind,I just recalled being advised the triple carbs had different fuel pump so obviously 38 or 44 their useless to me.
  42. Re: Vxr parts interchange with wave venture help on parts

    559231

    This will go down as longest thread concerning elusive 4mph in pwc.com history!lol
    Anyways here’s the 1100 motor i got the carbs have 4 bolts so this makes them
    44mm not 38?Are these...
  43. Re: Vxr parts interchange with wave venture help on parts

    Thanks for all your advice.Thats sums it up,the ski is what it is a big heavy cruiser. Glad I didnít buy a ride plate. I was hoping impeller could come off from nozzle area I donít wana screw it up...
  44. Re: Vxr parts interchange with wave venture help on parts

    559222559223559224559225

    Guys so Wich 1 is the pipe and Wich 1 is the water box or muffler?The manifold was changed he put this chrome or stainless looking manifold that hooks up to a a big hard u...
  45. Re: Vxr parts interchange with wave venture help on parts

    Hey what’s up dude.ya mid 40s but I’m only at 38-39.
    Hey I figured out what I’m Gonna do.Stock head work it like mill it and or better domes to bump psi. You know that vxr started at 175psi 4yrs ago...
Results 1 to 45 of 63
Page 1 of 2 1 2
Powered by vBadvanced CMPS v4.2.0