Search:

I would be contacting them BEFORE you run it!!!! Might be too late for that..

Does the one on the left look a bit more mature than the other 6? Maybe the mom of one of the others? If so she has aged really well!!!

We have the Kard-A**-hians, and the "monkey see monkey do phenomenon" to thank for this trend. Some men seen to like it, I am just not one if them.

Can't help with the thread size don't have one to measure. But you can do your self. It is most likely metric. Measure the distance between the red arrows in the photo in mm. If your plug is like...

On mine that, little bladder is under the exhaust manifold, above the starter. It is impossible for me to get my hand in there. You have to have a long, thin, flexible arms to reach it. If there is...

Just to clarify what you are saying.

1) Your negative battery cable is connected directly to the starter.

and

2) When the starter is not connected to the engine there is no current drain....

Have you tried PB Blaster? Spray it on a couple times a day for couple of days. Let it soak in.

That guy holding the boat had a nice view before they jumped!!! Did not even notice him till I tried to figure how they kept from rolling it over jumping from the side rail like that.

I notice that all of the negative feed back in regard to SBT has been removed.


Interesting

When you decide that you get a whole new assembly that is the best time to work at getting the old one apart. You will learn from the experience, and will not be out anything if you break it,...

the needle seats are 1.2 in my 98 770 carbs. I have been unable to find replacement 1.2. 1.5 is the smallest, I see. since the size affects pop off pressure, I used the original 1.2 seats with the...

There is a lot to digest here. just cherry picking one thing, "- Right engine had hesitation from 4500-5500. I would have to push past 5500 to get it to go there and then pull back as it ran away to...

is this something new that happened recently? or is it a new to you boat?

White is in the middle.

557839

Search for additive vs subtractive colors if you need more information about color

Not to interrupt with technical stuff, but, the colors yellow and purple are complimentary on the color wheel. You can relax because it is natural for you to like purple if you also like yellow.
...

Have you taken a look on line? https://www.jetskiplus.com/seadoo-repair-kit-for-lcd-info-gauge-center-display

I have no experience what this, but have been following a thread on another site...

Where was it stored? Is the cover damaged also? It was not a mouse, they tend to chew more, there would be scalloped edges from the teeth. Perhaps a bird of some sort. I see small punctures...

557337

twist it the same way you take the cap off a water bottle.

I have been thinking about replacing the worn out tall tires on my double trailer with them to get it lower to the ground so I dont have to back in so deep.

Lots of plastic in that photo.

When you look at her from the other direction, the right one looks bigger. ha..

557007

Cute puppies!!

BEFORE you expose it to salt, I think it is a good idea to spray inside your engine compartment, and behind your instruments and all electrical connections with something like CorrosionX. ...

damn!!!

In regard to #7409..

I might know that girl that is cropped out of the photo... what I can see sure looks familiar.

She definitely makes a powerful statement all by her good looking self. No need for ink to distract from her!!

Since this is video day.

https://s3-us-west-1.amazonaws.com/hmt-forum/woman_holds_other_womans_bikini_for_photograph.mp4

That makes sense.

That is her second drink or maybe 3rd!!

Not trying to start an argument, I am just curious why you would replace the pump and not the most important part of the pump?

If you are going to have it all apart anyway, and not going to...

Whew, this is a tough one. Here are my thoughts in the order you mention each issue.

#1 Replacing the starter solenoid would not have have fixed any issue that would have caused your battery to...

She has REALLY nice... ..fish.

Ok well I am sticking with that pattern being created by a grinder or similar tool. If you did not do it, the question becomes how and when they got there.

If you look closely are the surface of...

That is what the gasket I got from SBT was like. I sprayed it with Permatex Copper.

556337

can you give us a better photo, that one cannot be enlarged enough to show details

Those marks on the impeller appear to be too "regular" in shape to caused by cavitation. They look more like a light touch with a small grinder. The other photos are not clear enough to say for...

If an inexperienced machinist used a regular vertical mill it is very possible, even likely, to have done it wrong exactly the same on both cylinders.

If the part was was set-up on the machine...

The bore could be off center if the machinist did not know what he was doing. If that is the case, all kinds of things can be wrong with it.

I had to look it up also, never heard that term before. That is what I like about this forum, you can learn something new every day!!!

My ZTR mower has one of those Kawasaki V twins. Mine is only 19hp. I could put a turbo on that and get the lawn done faster!!! :)

You can have that tats, the rest of her is plenty to get my attention!!

Just sayin'.

I do realize everyone likes different things and that is a good thing.
But pics like that do make me...

This is #7095 with the exposure edited some to show her thong a little better.

555886

#7085 NICE hat!!!

We always need to be careful when talking about "backfires." Sometimes the term used to describe a situation where the "explosion" happens on the intake side, with the intake port open and the blast...

Any marker you get can be mounted on an easily fabricated bracket that will hold them far enough out so you can see them in your mirrors.

"UniStrut" comes to mind as an easy way to do this. ...