Search:

Actually I believe it's a whole new top deck based off of a mold that was a combo of 300SX and JS hulls.

Do you have one with inserts in it to fit a Superjet ?

I used a Protec exhaust on mine made for an easy swap

There is a rubber tee fitting at the top of the oil tank that plugs into

I wouldn't buy a stick of gum from that guy , not even with free shipping !

Looks like the bolts were not tightened down properly at some point maybe, yhose things will shake and rattle theirselves to death.

The one nearest to the fuel tank, Just got through with one of these , no matter how many of these you work on they are a PITFA every dayum time !

Think of this as a preempted strike , I am posting before you ask. This is how I secure oil lines on these, I use aircraft grade stainless steel safety wire, it is wrapped around the hose twice ,...

:damnit:

https://www.youtube.com/watch?v=iNngC1Ea2rA

I can't wail lol

I usually just put it back together dry

Yes an 1/8 drill bit will do the trick, like I said carefully or you will drill through and kiss the adj screw.

I can't really say since I only rode it a few times with the first hood, the second hood did have to be heavily reinforced with carbon fiber to work and not flex.

It's not readily apparent on my build but that is actually a Team Butch lightweight hood on mine now. The first pic has both fixie hoods in it.

The adjustment screws are there or at least the low speed screws are , they are under tamperproof caps, you have to carefully drill through the caps unless you have a drill bit with a stop on it,...

That is very similar to the first hood that was on mine.

Do it again it looks to still be listed in their catalog

Ok I am going to break it down for you , go to google and type in 02.4505.125 and see what comes up

Pro x uses RIK ring sets in their piston kits, WSM also uses them at any rate here you go

https://splashndirt.ca/Catalog/PartDetail/42903/pro-x-piston-ring-set-jet-ski-js650-js300

There is no better or worse , the 65u cylinder is better for top end power, the 63m is better for bottom end power, it depends on what you are doing with your particular machine. I am building a...

Well mo falker you learnt sumpin new today

This is believed to be a Mariner 15 degree stainless impeller, it has no markings on it and came in a SkatTrak box when I received it, measurement with a protractor seems to verify the 15 degree...

um the original post was from back in 2008

you have more bolts in the center holding it on , there ae four 5mm allen heads with plastic collars around them so the allen wrench will grab onto them and you can pull them out with the allen...

I use right stuff silicone , it has more of a rubber texture than silicone or 5200 and it dries in 30 minutes

Info centers are plug and play, no tricks to them, if a fuse blew something is shorted out.

If you are going to leave do so with style , or with a bang either way works .

yes because the bolt circle is bigger on the reed engines

Apparently he didn't get his Christmas bonus like the rest of us, DAMMIT I hate it when that happens !

I ended up getting some kind of aftermarket x2 steering post and installed it, it's in the right position for me at 5ft 9 in

Just post up some scammer posts and the people in charge will delete it for you

Only thing you have to remove is the exhaust, as far as getting the pipe off you have to twist it out of there a certain way or it won't come out ,, I have no idea how to describe exactly the way to...

Whats really F'ed about Ebay is that you can have negatives and if you sell enough crap it barely dents your percentage as a who;le, most people are not smart enough to deep dive into the feedback...

With the exception of Friday the 13th

I pity the fool that does not participate in our longstanding Black Friday tradition here, post em up guys.

how much shipped to 36037 I do not need the base

Located in Alabama, I can't say if you can do this kind of work or not, I can say if you want to split those tw decks you are in for a rude awakening and much more of a repair than has been covered...

If I were doing that repair and I have repaired much worse BTW, here is how I would do it , I would basically do something similar to what Myself said, except that I would use the existing pieces,...

how about the seat foam ?

https://watercraftjournal.com/video-what-you-need-to-know-about-repairing-sea-doos-cm-tec/

Google , it's a wonderful thing

I am kinda wanting to do a custom seat so I believe I am just getting a seat foam from Marine king

As stated looking for the foam for a TS650 seat , I have several seat bases in great shape already , I just need the foam, hit me back on this thread or via PM.

Personally I wouldn't want to increase compression on one of these engines

Pretty sure my ZXI 900 still has the stocker on it I was going to replace it with an Ocean Pro plate LMK if you need this one