Evil

I am going to be turfing my ski with the roll of diamond turf from hydroturf.com (too many turf's..lol) Anyways, i want to turf the sides and front. are there any tips on doing this? what glue or anything?

__________________

Russell2sx

weldwood contact cement from walmart...not the low voc crud that home depot sells...clean the old stuff off real good...put a coat on the turf let it dry then do another also coat the surface and let dry then just stick it on....try to cut the pieces close to the size you want first but you can use a razor to trim it up and heat guns help mold it....look on my page at my pics to see my handy work...you close to beaumont i can help out

Evil

ok, thanks! also heard that if you sand the edges with fine grit sandpaper that looks nice.

__________________

Evil

i'm in placerville, which is very far from where you are.

__________________

nightrider05

I have also read to use the Weldwood GEL contact cement. Said it works better.

Mr Bojangles

I used the one in the red can and it worked fine. Also some heat will help you shape it too

__________________
1989 Kawasaki X2
1991 Yamaha SN SJ
1995 Kawasaki 750ss



Truck Bed Launch System - http://www.pwctoday.com/f26/mr-bojan...ml#post2683099

seadoobutch787

PWC members get 15% discount, remember to tell them that!!

__________________
96xp limited mod

96 gsx winter project mods on the way!

perryak

I have used both, and definitely prefer gel. Not sure if its any stronger, but a hell of a lot easier to work with.

__________________
'91 650sx - skat trac 15°, rend plate/scoop grate, stock exhaust mod
'92 550/650 conversion - ported, keihin 42 (Sudco), boyesen reeds, stock exhaust mod, solas 14/19, OP big bore nozzle, WW freestyle cone, tri-scoop grate, OP skegged plate
'96 Waveraider 700 - Just a couch

attnondeck

red can is important!! the green can dissolves in water!

__________________
Brendan

1990 SN SJ 701 1990 SN Super Jet 650 Winter build
1989 js550
1990 550SX
1990 300SX