fastsuperjet

anyone know how to run triple pissers on a superjet with a b pipe and dual cooling out of the head.

sxr951

Do u have 2 cooing lines from your pump?

__________________

fastsuperjet

i will have dual cooling lines

VEGAS 21

One cooling line goes the exhaust manifold.
The other goes to the bottom of the head pipe. The one that goes to the head pipe will exit out the top and go straight to a pisser and tee off to the stinger at the end of the exhaust chamber.

The other two will come off the head. There's your triple pissers.

fastsuperjet

shouldnt it go to the top of the head pipe?

MikePeavler

1. Run one cooling line to your exhuast manifold.
2. Run other cooling line to the other side of your exhaust manifold.
3. Out of rear head outlet to top of the Head pipe
4. Pisser from the front of the head
5. Pisser from the chamber

That's the best method....."3" pissers is not needed.

VEGAS 21

It will work both ways, but I have found it better to run the water in the bottom and out the top.
Close the top and middle screws. Open the bottom screw a 1/4 turn to start with, Then start to dry it out from there.