carb replacement

C.MURRAY · 07-15-2009, 12:31 AM

im looking to replace cvcd carbs on a 2000 zxi 1100, ada 26 cc heads , 83mm bore, ported case & cyd, stage 3 deta reeds and cages, rd manifold ported, blueprinted hull & pumb polished and knife edged pump 1000 grit, bored nozzle 4mm ,premix , 6 deg advance plate, ext nozzle 1.5 inches , worx sposons,13\18 skat track swirl,rd ride plate , maxxi loader grate, and the elevation were i live and ride is 5500 ft. need some advice thanks.

Group K · 07-17-2009, 11:33 AM

It used to be that installing 42 Kiehins was the best choice ... but those have not been imported for over 3 years, so they are hard to find. 44 Mikunis are too big and will be difficult to get good low range power from. The best remaining option is just to find a set of the 1997 pre-CV carb sets, or construct a set of 38mm SBN Mikunis.

Hope that helps.

Respectfully, Harry Klemm

Quote:

Originally Posted by C.MURRAY

im looking to replace cvcd carbs on a 2000 zxi 1100, ada 26 cc heads , 83mm bore, ported case & cyd, stage 3 deta reeds and cages, rd manifold ported, blueprinted hull & pumb polished and knife edged pump 1000 grit, bored nozzle 4mm ,premix , 6 deg advance plate, ext nozzle 1.5 inches , worx sposons,13\18 skat track swirl,rd ride plate , maxxi loader grate, and the elevation were i live and ride is 5500 ft. need some advice thanks.

C.MURRAY · 07-19-2009, 12:01 PM

Quote:

Originally Posted by Group K

It used to be that installing 42 Kiehins was the best choice ... but those have not been imported for over 3 years, so they are hard to find. 44 Mikunis are too big and will be difficult to get good low range power from. The best remaining option is just to find a set of the 1997 pre-CV carb sets, or construct a set of 38mm SBN Mikunis.

Hope that helps.

Respectfully, Harry Klemm

thank u harry i will let u no how it turns out.