kevstigersharks

My bilge pump on my 97 Monte isn't working. I took it out and bench tested it and it works and when I press the bilge button the relay clicks but no power to the pump. Could it be a bad relay or is there something else I am missing.

Thanks,
Kevin

__________________
2-770 Tigershark Monte Carlos

SCC_583

check all of the connections.. thats where i would start

__________________
1986' fisher price big wheel

dank

Check the circut breaker on the top of the electical box. The wires will fall off it when they get old. You can replace the circut breaker with a 4 amp fuse.

__________________
Providing service to all model Ski's in the Charlotte, Lake Wylie area.

bryan428

Your 3.5 amp fuse is prolly blown.

bellmer

ive had 2 problems w/ the bilge pumps on mine, first was a fuse under the black box pull 4 bolts on the box should be under there. and the other was the green fuzz. killed my relay. but if your clicking but not running prolly the fuse

JOSNEY111

having the same problem , I here the relay clicking but not running ( bilge pump )

bryan428

Check the 3.5amp inline fuse under the fuse box, make sure its not blown. If it replace, if its not disconnect the connection to the bilge pump (should be a brown and black wire) test for power when hitting the bilge pump button. If you get power, the bilge pump has gone bad and will need to be replaced.

silenthunder777

i have the same problem....can hear it click but wont work....took it out and bench tested it and it ran fine

lynn

I'm having the problem of the bilge working manually by pushing the button, but won't work automatic when motor is running, Blow a hole in the hose and flooded the engine compartment. Anybody got any ideas. Thanks Lynn

silenthunder777

i think everyone has a issue with there bilge today lol....my problem....99 TS770R bilge just clicks when i hit the button, checked voltage coming into the connector for the bilge and getting 12.35 when i hit the button, so i took bilge out and hooked right to battery and it ran perfect....connected the conntector back together and nothing....so i decided to cut connector and test wires still getting 12.35 UNTIL i connect the brown and black wires to the bilge then it goes to 0...i can hook one wire up and still get 12.35 volts but as soon as i attach the 2nd wire it goes right to 0 with just a click.......no idea about electrical issues, any help would be great