roy81471

Hi all. I purchased a 2003 kawasaki stx-12f recently and it has a couple chips on the front of the hull just below the trailer strap hook. I'm a complete noob and have read the other articles on gel cost repair etc. However I am still unsure what to use to fix It. The chips are deep down to the surface of the fiberglass but not completely through. My question is what do u all recommend using to fix it? I do want to get the color close but an exact match is not necessary since it will b hard to see. Your input is appreciated.

PEVO

I'd try some of these products on the damage on the hull. These epoxy products are used in the RC airplane hobby world, but will work on small chips & gouges on hulls too. Example: 2-part epoxy mixed with micro ballons to fill in chips. Then use epoxy paint to touch up the patch to match the hull.

http://www.mecoa.com/acc/paint/index.htm

__________________
------------------------------------------------------------------------------------------------------------------------------------------------------------------------
1998 1100 STX Stock
-------------------------------------------
Pre-mix, Fuel Primer & keyed battery disconnect installed

2000 900 STX Stock
-------------------------------------------
Pre-mix, Fuel Primer & keyed battery disconnect installed