bruce

I have a 91 vxr and would like to know if anyone has fitted a tell tail to one? ie the water jet out the back. if so what would the easiest way to do this be? thanks

JetSki Solutions

If you study the exploded views on Riva's part finder site for various models that have a tell tale, you should be able to determine what parts to get to do this. Most models have a tap off the pump nozzle, with a piece of tubing feeding a fitting on the rear hull deck. The newer superjets have a fitting actually mounted to the steering nozzel. Your pump nozzle is probably under the rear deck, so this may not work for you. I have a deck fitting somewhere in the misc box. I would be happy to send it to you N/C. Please e mail if you need it. 8)

bruce

thanks for the advice. i am currently respraying the hull and have taken out the rear jet unit. this came out easily ie the spline pulled out from the back of the motor. would the tap be on this part? i am quite the newbie on jetski's the housing is black and encloses the drive shaft and impellor

mouthfulloflake

my 92 vxr had a tell tale, I removed it.

it was a small black piece of plastic held on by 2 screws in the very top of the steering nozzel..

Its been years since I pulled it, but I think it was right there.

__________________
I no longer post on this site.

bruce

is this the piping that i can hook up to get the tell tail? that rear deck piece would be great. i was going to "add" a hole to the rear deck for this

blaster94

No. The 91 did not have the spoutt off of the pump. The 91s had a plastic 90 degree fitting that mounted to the nozzle.

__________________
94 Blaster x2 94 SJ 04 R12X
Click this=>https://www.awahq.org/p/joinNow.php And Join!

bruce

HOW WOULD I GO ABOUT HOOKING ONE UP? DO YOU KNOW WHAT THIS TEE PIECE DOES?THANKS