Superjet Add Pisser line

ryanerb · 06-02-2009, 12:50 AM

Where do I tap into to add a pisser? I got my fitting, I just gotta run the line. For those of you who don't know, this ski doesn't have a pisser stock.

I was thinking into that black line running from the YAMAHA black piece (exhaust pipe/head??) down to the head.

kraqus · 06-02-2009, 10:44 AM

I don't think the line you are referring to is a water line. I believe that is an exhaust Vacuum hose.

This is what mine looks like. There is the water line going right into the Head and there is a T where another line comes out as a pisser. So you don't have a water intake in your head from what I can see in the picture.......mmmmmmmmm......

camojoe157 · 06-02-2009, 12:06 PM

Kraqus he has a water in line. Look in the picture above the rear spark plug. The ski comes with the water in line that has a piece of black curagated plastic over the hose. You can barely see it in the picture. But that is were you would install one on the stock set-up.............

ryanerb · 06-02-2009, 03:16 PM

Quote:

Originally Posted by camojoe157

Kraqus he has a water in line. Look in the picture above the rear spark plug. The ski comes with the water in line that has a piece of black curagated plastic over the hose. You can barely see it in the picture. But that is were you would install one on the stock set-up.............

ya, i can see in my pic the black plastic over the water line. thanks camo!

ryanerb · 06-02-2009, 06:18 PM

Can I tap into the flush line. It looks like they go down to the same spot on the case as seen
superjet hookup.jpg
superjet waterlines.jpg

camojoe157 · 06-02-2009, 07:47 PM

Since you have the stock pipe on it I would still tee off of the water in line to the cylinder head. For example if you tee off of the flush line you might think that water is going through your motor but if there is a plug in the line that goes to your cylinder head you wouldn't know it because you tee'd off of the backflush.....so for reassurance run a tee off of your water line....

ryanerb · 06-02-2009, 07:49 PM

smart idea... glad i checked with you first.

camojoe157 · 06-02-2009, 07:51 PM

good luck ryan