06 yamaha FXHO overheating ... - Blogs - PWCToday
pxctoday

» Log in

User Name:

Password:

Not a member yet?
Register Now!

» Find OEM Parts

» Jobs

» wallpapers

View RSS Feed

TonyR

06 yamaha FXHO overheating ...

Rate this Entry
Hello all..
I need some help with my ski. I have an 06 fxho yamaha with only 50 hours on unit that seems to be overheating after 30min on the water at idle after coming down from some speed passes. I take the ski out and run on the hose and it never overheats. All of the water passages seem to be clear as I've smoke tested and vac tested. I have a good stream of water coming out of the port side piss hole when on the hose. I recently noticed the jet housings are separated a little and not quite sealed with a gasket. Im assuming the previous owner had them apart for some reason. Could this be my problem ? If there not a good enough seal for the water intake port in the housing good this cause an overheating? I would assume there is so much force from the impeller that it wouldn't matter if there was a 4 mill gap. Either way I've replaced and repaired just looking for next step if this doesn't solve my problem. Thanks in advance..
Tags: None Add / Edit Tags
Categories
Uncategorized

Comments

Powered by vBadvanced CMPS v4.2.0