2012 Yamaha VX1100 and Getting an alarm for high voltage, 14.5V - Blogs - PWCToday
pxctoday

» Log in

User Name:

Password:

Not a member yet?
Register Now!

» Find OEM Parts

» Jobs

» wallpapers

View RSS Feed

Joe T

2012 Yamaha VX1100 and Getting an alarm for high voltage, 14.5V

Rate this Entry
Can anyone shed some advise about this? I replaced the rectifier since the dealer said start there and no difference. Had the battery checked, 1.5 years old and getting 12.6 volts.I checked the red and black wires before they plug into the rectifier and getting the same 12.6V. On the screen, I'll get 14.3-14.5 and it will sound an alarm. All I get is a code 01 which is normal. I noticed a code 55 recently, which is steering, just before it turned off, but the steering feels normal. Any suggestions is appreciated.
Thanks

Comments

Powered by vBadvanced CMPS v4.2.0