PWCToday - Entries for May 2015 - Blogs

View RSS Feed


  1. WMAZZ - GREAT technical support

    Quote Originally Posted by wmazz View Post
    Quote Originally Posted by billman100 View Post
    Have a 2.5n/s with a 115g spring so I should be at 19psi for pop-off. Looking for the jet sizes I should get.
    You still haven't said anything about the return line restrictor size? Did Riva have any recommendations
    for the high speed screw and low speed screw?

    I have never jetted based on pop-off. 19 psi is normal for your set-up, but over the years I have seen
    differences in gauges.

    First I recommend you try to insure the method you use to